Loading... Please wait...The Compact Wide Cardioid is a phantom powered (P48) condenser microphone using the same type of cartridge as the DPA 4015, but is preamplified using a build-in ultra-small thick-film mounted FET-preamplifier.
The linear frequency response together with the nice and subtle high frequency lift give that brilliant sparkle of purity, which will bring your sound to a higher level. The ultra-small design makes the Compact Wide Cardioid the perfect choice whenever high definition audio and insignificant size is paramount. With unbelievable depth and precision, the DPA Compact Wide Cardioids will exceed your expectations on choirs, percussion, grand pianos, reed and brass instruments and much more.
Three variants
There are three variants of the DPA Compact Wide Cardioid:
4026 has a rear-mounted cable
4027 has a side-mounted cable
4028 has a standard LEMO connector
| Directional characteristics: | Wide cardioid |
|---|---|
| Principle of operation: | Pressure gradient |
| Cartridge type: | Pre-polarized condenser |
| Frequency range, ± 2 dB: | 40 Hz – 20 kHz, with a max. 3 dB soft boost at 10 – 15 kHz |
| Sensitivity, nominal ±2 dB at 1 kHz: | 8mV/Pa; -42 dB re 1V/Pa |
| Equivalent noise level A-weighted: | Typ. 20 dB(A) re. 20 µPa |
| Equiv. noise level ITU-R BS.468-4: | Typ. 25 dB (max. 28 dB) |
| S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): | 74 dB(A) |
| Total harmonic distortion (THD): | < 1% THD up to 116 dB SPL peak |
| Dynamic range: | Typ. 96 dB |
| Max. SPL, peak before clipping: | 145 dB SPL peak |
| Output impedance: | <300 ohm |
| Cable drive capability: | Up to 100 m (328 ft) after XLR connector |
| Power supply: | Phantom P48 |
| Current consumption: | 2.6 mA |
| Connector: | 3-pin XLR-M (Standard P48) |
| Weight: | 33 g (1.2 oz) (without cable) |
| Capsule diameter: | 19 mm (0.7 in) |
| Microphone length: | 30 mm (1.2 in); 71 mm (2.8 in) incl. connector |
| Cable length: | 3 m (9.8 ft) |
| Operating temperature range: | -40 to +55 °C (-40 to 131 °F) |