38.1 cm x 27.9 cm

• Improves transient response and imaging
• Tightens up the bass for greater accuracy
• Eliminates resonance and phase anomalies
• Improves translation to other audio systems

Designed for nearfield monitors, the Primacoustic Recoil Stabilizer™ is a unique speaker mounting device that at once eliminates disruptive resonant coupling from the loudspeaker to the stand, while providing a stable base that reduces the recoil caused by the forward energy of the loudspeaker motion.

The Recoil Stabilizer is a loudspeaker platform that combines three basic
components: a high-density urethane foam base to isolate the speaker from the shelf, monitor-bridge or stand; a heavy ¼” laser-cut steel plate; and a thin neoprene top surface. The foam effectively decouples the loudspeaker to eliminate vibration-borne resonance that invariably introduces phase anomalies, while the steel plate introduces significant mass to the structure, stabilizing the speaker. The no-slip surface coats the top to ensure the monitor stays firmly in place.

By reducing the backward 'recoil' as the speaker coil pushes energy forward, the initial transient no longer suffers lag and the sharpness of the resulting impulse is more defined. Upon first listening, one immediately notices more punch and extended low end. Upon further listening, one begins to notice greater detail at all frequencies, improved transient response and more defined depth of field. This not only makes mixing easier, but since the Recoils eliminate unknown resonance from contaminating the sound, your mixes immediately translate better to other rooms and audio systems.

The Recoil Stabilizer is available in various sizes, weights and firing angles to address the vast array of speaker designs currently on the market and personal mounting preferences. To make selection easy, we have produced a simple cross-reference chart to match the right Recoil Stabilizer for your monitors.

The Recoil Stabilizer is available in various sizes, weights and firing angles to address the vast array of speaker designs and mounting preferences. Use the reference chart to find the right Recoil Stabilizer for your monitors. Complete details for each model can be found on the specifications page.

Recoil Stabilizer Specifications

The Recoil Stabilizer is a nearfield monitor platform that incorporates four different elements to create the whole. This includes:

1. Isolation foam
   High density open cell acoustic foam provides acoustic isolation to eliminate coupling between loudspeaker and shelf.
2. Steel platform
   Laser cut ¼” (6mm) steel platform adds the necessary stabilizing mass to rigidly hold the nearfield monitor in place.
3. Curved front panel
   Curved front panel eliminates standing waves and adds mass to the platform without increasing the footprint.
4. Retention pad
   Thin no-slip neoprene surface ecures the nearfield monitor to the top surface for maximum signal transfer.

RX9

MODEL	ORDER NO.	PROFILE	HEIGHT	WIDTH	DEPTH	LOAD LIMIT
RX9-HF	Z860-1509-00	Horizontal	2.625" 67.5 mm	15" 381mm	11" 279mm	50 lbs (22 kg)
RX9-DF	Z860-1509-05	5° Down Fire	3.125 " \ 2.125" 88 mm \ 55mm