Due to popular demand the Studio 100's have gone back in manufacture. Due to increased manufacture costs the price has changed.

Few compact loudspeakers offer such a clean uncoloured performance and remarkable transparency. With virtually flat frequency response and negligible distortion, the Studio 100 is one of the most accomplished compact performers on the market today.

The bass unit is unique. Manufactured exclusively for ProAc, it has a particularly linear motor assembly, superb magnet and chassis construction and a special centre pole plug. When precisely tuned in the cabinet this driver gives an incredibly natural bass quality and definition, combined with generous power handling.

The tweeter is a featherlight one-inch soft dome unit, once again specially manufactured for ProAc. Made from a new impregnated fabric, the dome itself is exceptionally light in construction giving the Studio 100 a distinctively uncoloured and transparent high frequency.

The high quality crossover network marries the two drive units seamlessly giving a spacious soundstage with almost tangible imagery. Only the finest components are used and the speaker is wired throughout with our own high-quality multi-strand wire. The cabinet itself is made from a composite material with walls of differing thicknesses and a new and more efficient heavy damping material ensures that the cabinets are practically inert.

Although the Studio 100 can be shelf-mounted, high mass stands with good rigidity are preferable for optimum results. The full potential of these thoroughbred designs will only be realised through the use of the highest quality partnering equipment.

Technical Specs

• Nominal Impedance: 8 ohms
• Recommended Amplifiers: 30 to 150 watts
• Frequency Response: 35hz to 30Khz
• Sensitivity: 88db linear for 1 watt at 1 metre
• Bass/Midrange: Driver 6 1/2" treated cone with special centre pole plug.
• Tweeter: 1" (25mm) soft fabric dome with ferrofluid and rear loading. Mirror image offset.
• Crossover: Finest components on dedicated circuit board. Multi-strand oxygen-free copper cable throughout. Split for optional bi-wiring and bi-amping.
• Dimensions
  16" (406mm) high
  8" (203mm) wide
  10" (254mm) deep
• Weight 24 lbs (11kg) /cabinet