Rode Stereo VideoMic Stereo X-Y Condenser Microphone

Product Description

The RØDE Stereo VideoMic is a broadcast quality stereo microphone designed for use with camcorders, DSLR cameras and portable audio recorders.

Two high resolution 1/2" condenser capsules are mounted in a fixed X/Y stereo array, providing a very natural stereo recording, while still offering a high level of rear rejection.

The Stereo VideoMic is an ideal microphone for capturing environmental and ambient sounds, as well as live music. For dialogue and directional applications the RØDE VideoMic and VideoMic Pro are recommended.

An in-built shock mounting system isolates the Stereo VideoMic capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand.(note that cameras with proprietary sized mounts with require an additional adaptor.)

In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

A -10dB level attenuation (or PAD), selectable from the rear face of the microphone, allows recording of loud sound sources, such as live music or motorsport.

The Stereo VideoMic is ideal for use with DSLR cameras such as the Canon 5DMkII, Canon 7D, Canon 1D, Canon 550D/T2i, Canon 60D, Nikon D7000, Nikon D5100, Panasonic GH1 and Panasonic GH2.

The RØDE Stereo VideoMic is covered by RØDE Microphones' industry leading 10 year warranty.

Acoustic Principle	Pressure Gradient
Active Electronics	JFET impedance converter
Capsule	0.50"
Polar Pattern
Address Type	End
Frequency Range	40Hz - 20kHz
Output Impedance	200Ω
Maximum SPL	134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity	-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Power Options
Weight	288.00gm
Dimensions	65.00mmH x 102.00mmW x 170.00mmD
Output

Product Videos

RODE SVM Stereo VideoMic for camcorders (05:06)

http://www.dvestore.com/brands/RODE.html Hear the quality of this lightweight on-camera mic. Use it to record music, dialogue or just ambient sound. We like to use the RODE SVM on a boom pole. The bottom of the SVM is threaded to accept a standard 3/8" pole mount. An accessory called the RODE VC1 extension cable allows you to move the mic closer to the subject. The RODE Stereo Video mic offers outstanding build quality, superb sound and is a great value - especially with the included FREE wind protection http://dvcreators.net/rode-svm-stereo-videomic/